Electronic cigarette resistors: when and how to change them?

Why choose the nicotine-free puff for vaping?

Recently, you have started to vapoter with a classic electronic cigarette and you must then recharge it regularly to enjoy unique moments of vapoter. It is true that it has already happened to you to have no battery in the middle of the day and that it causes you problems. To vapoter in all circumstances, you can turn now to a puff, or disposable electronic cigarette. Even if you've heard about it, you haven't yet taken the puff step. If you want to know more about the disposable electronic cigarette, you can continue reading.

Focus on the puff

When you start in the world of vaping, the puff can clearly be the right solution for you. Indeed, you will not have to think about recharging the battery or adding liquid. The puff is a disposable electronic cigarette that you will have to throw away once the tank is empty. If you decide to take the plunge, you can find puffs with various flavors to vary the pleasures in your vaping. If you just want to enjoy the flavor of vaping, you should know that you can find puffs without nicotine for non-smokers. In addition, the nicotine-free puff can also help you to wean yourself off and quit smoking smoothly. In addition to helping you quit smoking, the nicotine-free puff is easy to carry and can easily be carried in your bag for a pleasant vaping experience. In any case, you can try the puff and it is very possible that you swear by it after several weeks of use. To find your happiness, you can go to online stores specializing in vaping.

Why is my resistance drowning?

A clogged or flooded resistor can be the cause of a rise in electronic cigarette liquid. Check the amount of propylene glycol and vegetable glycerin in the e-liquid. ... Unscrew the resistance and wrap it in a paper towel to absorb the excess liquid.

Why does my opposition run out so quickly? A misaligned battery Below the recommended wattage, the resistor can leak. If it is used on top, it evaporates the liquid too quickly and gives it the famous burnt taste. The power range is often indicated on the resistance or, if this is not possible, on the box.

When I Vapote I have liquid in my mouth?

To summarize, it is not dangerous to have e-liquid in the mouth if there are small amounts. So always be sure to check your equipment and settings, inhale slowly and long, and do not leave the e-cigarette aside or in a horizontal position for too long.

Why is my E-liquid too liquid?

2 main factors explain an e-liquid too liquid: The presence of water or alcohol in the composition of the bottle. Too much propylene glycol in its base pg vg.

Why is my Vapote gurgling?

In a general context, this situation occurs for several reasons, such as the setting of a power too high, a poor calibration of a resistance, low viscosity of an e-liquid or a poor sealing of the system.

Why is my Vapoteuse gurgling?

In a general context, this situation occurs for several reasons, such as the setting of a power too high, a poor calibration of a resistance, low viscosity of an e-liquid or a poor sealing of the system.

Why do I inhale liquid with my electronic cigarette?

A clogged or flooded resistor can cause electronic cigarette fluid to come back up. ... A high proportion of propylene glycol can make your fluid a little too liquid. Unscrew the resistor and wrap it in a paper towel to absorb the excess liquid.

How do you know if the resistance is dead?

In short: how do you know if your opponent is dead?

• You know the drill.


• Your steam is less dense.


• Your steam has less taste.


• Your resistance turns black.


• You have been defrosting with the same resistance for over 20 days.


• She is making more noise than usual.

Why did my resistance burn out quickly?

A misaligned battery. Each resistor has a power range (expressed in watts) that can be adjusted for optimal use. Below the recommended wattage, the resistor can leak. If used on top, it evaporates the liquid too quickly and gives it the famous burnt taste.

How not to damage its resistance?

To increase the life of your resistor, it is also important to observe a 10-second pause between inhalations. This means that the resistor cools down and does not overheat. Overheating is a common cause of premature wear.

When to change the resistors?

In general, it takes 2 to 3 weeks. The quality, the type of liquid, the material are parameters that can shorten the life to 1 week, or on the contrary keep it more than 3 weeks.

Why does my opposition run out so quickly? A misaligned battery. Each resistor has a power range (expressed in watts) that can be adjusted for optimal use. Below the recommended wattage, the resistor may leak. If used on top, it evaporates the liquid too quickly and gives it the famous burnt taste.

When should we change the resistance of his electronic cigarette?

As an average, it is reasonable to say that a change of resistance every 15 days when used daily is a respectable frequency.

What is the life of an electronic cigarette?

Main consumption of the electronic cigarette, the resistance must be changed regularly. Whether they are ready to use or rebuildable, the lifespan, which is generally 10 to 15 days, is affected by several criteria related to the conditions of use. Explanations.

How to know if the resistance of the electronic cigarette is dead?

Resistance to a dead electronic cigarette often results in a dry hit. Dry hit is the unpleasant burnt taste you get when you inhale vapor. It means that the cartridges and cotton of your nebulizer are clogged.

How do you know if the resistance is dead?

In short: how do you know if your opponent is dead?

• You know the drill.


• Your steam is less dense.


• Your steam has less taste.


• Your resistance turns black.


• You have been defrosting with the same resistance for over 20 days.


• She is making more noise than usual.

How to know when to change the resistance of an electronic cigarette?

In general, you should change the resistance every 2 to 3 weeks or every 15 to 20 fills, but it depends primarily on the frequency of use, the quality of the material and the e-liquid used.

How not to damage its resistance?

To increase the life of your resistor, it is also important to observe a 10-second pause between inhalations. This means that the resistor cools down and does not overheat. Overheating is a common cause of premature wear.

How do I know if I need to change the resistor?

You must replace the resistance of the electronic cigarette when: You feel a significant change in the taste of the e-liquid. Your vapor volume drops. Your weapon leaks.

When to change the resistor?

To summarize, your resistor is good to replace when it gives less vapor and the restitution of flavors is less pleasant. It is your experience that makes the difference.

What is a dead resistance?

A pure resistor (called dead resistor) is supplied with direct current from a variable voltage source. We connect an ammeter in series with the resistor to measure the current. A voltmeter is connected to the terminals of the resistor.

How to break in your Coil?

Running-in: For this, at low power (for example, for a resistor requiring a power of 80 W in use, a power of 35 W will be sufficient for the running-in), press several times, without maintaining pressed, on the button of shooting to obtain a small increase of heat on the resistance.

How do I mount a cartridge? The installation of the resistive wire is the most difficult step in the assembly of a cartridge. In this operation, the manufacturer must ensure that the part responds according to the power sent by the battery, and this, so as to heat the e-liquid as desired by vapotant ... all without clutter.

How do you build up your resistance?

Starting the resistor is nothing more or less than soaking the cotton surrounding the wire that heats and allows evaporation. When your heater is new, the cotton is actually dry. By putting drops on it, you simply prevent it from burning during the first heating.

How to make your resistance last?

How to extend the life of the resistor?

• Systematically start a new resistor;


• Vaporize e-liquids richer in PG than VG ;


• Set the watts of your electronic cigarette correctly;


• Don't chain steam (and take breaks between each steam draw);

How not to burn out your resistance?

The vegetable glycerin will promote the steam and its density. Many VG are not compatible with all clearomizers because this is what makes the fluid "fat". Depending on the openings and capillarity - "cotton density" - of your resistance, a greasy e-liquid will have difficulty circulating effectively.

How to make your own resistance?

To restore the resistance it is necessary :

• A coil of resistance wire (e.g. edge hall)


• Fiber (silica, cotton, cellulose)


• A template (screwdriver or micro-coil rod)


• A measuring tool (ohmmeter or electronic mod)


• An Allen key or a Phillips screwdriver depending on the atomizer.


• Cutting pliers and scissors.

How is a resistor made?

A chrome-nickel-iron alloy is usually used. For very high effects, a technology called "liquid resistance" can be used, which consists in passing the current through an aqueous solution containing copper ions.

How to make your own coil?

To make a coil, you need a few tools, which you probably already have at home: 1 pair of wire cutters, 1 pair of flat nose pliers, screwdrivers. At least that. The most important thing is to be 100% sure of the diameter of the tool to use to coil the resistance wire.

How to make your own Coil?

To make a coil, you need a few tools, which you probably already have at home: 1 pair of wire cutters, 1 pair of flat nose pliers, screwdrivers. At least that. The most important thing is to be 100% sure of the diameter of the tool to use to coil the resistance wire.

How to make a resistive wire?

How do I make and install the resistance wire for the reconstruction nebulizer? To make a simple resistance wire you will need: a pair of pliers to obtain the right length of wire. templates around which the resistance wire can be wound to obtain the right diameter.

How to clean the coil?

Use household alcohol to dry, scrub and clean the coil of an electronic cigarette cartridge. Alcohol is very similar to white vinegar.

How to make an electronic cigarette resistance last?

How to extend the life of the resistor?

• Systematically start a new resistor;


• Vaporize e-liquids richer in PG than VG ;


• Set the watts of your electronic cigarette correctly;


• Don't chain steam (and take breaks between each steam draw);

How to maintain the resistance? However, there is one sure thing you can do to maintain the resistance to reconstruction: by changing the cotton every 2-3. day and brush it with a wire brush, you will already remove a lot of dirt and avoid spraying. e-liquid residues that have not been...

How not to damage its resistance?

To increase the life of your resistor, it is also important to observe a 10-second pause between inhalations. This means that the resistor cools down and does not overheat. Overheating is a common cause of premature wear.

How not to burn out your resistance?

The vegetable glycerin will promote the steam and its density. Many VG are not compatible with all clearomizers because this is what makes the fluid "fat". Depending on the openings and capillarity - "cotton density" - of your resistance, a greasy e-liquid will have difficulty circulating effectively.

How to keep its electronic cigarette resistance?

The trick to keeping a resistance longer is to adjust the watts of your electronic cigarette. Prefer a low power. Vaping with a lot of force heats up more liquid in the Pyrex. The temperature is higher and you accelerate the growth of the resistance.

How to prime a Joyetech resistor?

You must therefore prime your resistors by applying a few drops of e-liquid directly on the resistance during assembly. When the tank is full, suck through the drip tip 2 to 3 times by plugging the air intakes to allow the e-liquid to enter the system.

How to start the heating element ? Starting the heater consists, no more and no less, in soaking the cotton surrounding the wire that heats and allows the evaporation. When your heater is new, the cotton is in fact dry. By putting some drops on it, you simply avoid that it burns during the first heating.

How to activate a resistor?

The priming of an e-cigarette resistance is simply to soak the cotton with e-liquid. Indeed, when your resistance is new, the cotton is dry. Soaking it in e-liquid hydrates it and prevents it from burning at first use.

When using an electronic cigarette, it's essential to take good care of the resistors to guarantee optimum vapor and avoid premature damage to the equipment. A clogged or damaged resistor can cause an unpleasant burnt taste, or even the complete rupture of the coil. To avoid this, it's important to know how long a resistor will last and, above all, how to know when it needs replacing. In this article, we'll answer all these questions, as well as those relating to daily coil maintenance, to help you get the most out of your e-cigarette.